Application and selection of disassembly gearbox

Release Time：

2025-06-19

As the "heart" of industrial transmission systems, the performance of reducers directly affects equipment efficiency, energy consumption, and lifespan. In the face of different working conditions, incorrect selection may lead to a cost increase of over 30%.

Application and selection of disassembly gearbox
As the "heart" of industrial transmission systems, the performance of reducers directly affects equipment efficiency, energy consumption, and lifespan. In the face of different working conditions, incorrect selection may lead to a cost increase of over 30%.

1、 Gear reducer: the leader in the heavy-duty field
Technical Characteristics

Transmission efficiency: helical gear>95%, spur gear 92% -94%

Torque range: Single stage can reach 200kN · m

Impact resistance: Gear tooth surface hardness HRC58-62 (carburizing and quenching process)

Classic applications

Mining ball mill: three-stage gear reduction, output torque ≥ 650kN · m

Cement vertical mill: hard toothed gear+forced lubrication system, with a lifespan of over 100000 hours

Port unloader: anti salt spray corrosion coating, suitable for environments with humidity>90%

2、 Planetary gearbox: the benchmark for precision transmission
Accuracy index

Backgap level: P1 level ≤ 3 arc minutes, P0 level ≤ 1 arc minute

Repetitive positioning accuracy: ± 0.001 ° (for machine tool turntable applications)

Non standard automation field

Six axis robot joint: average reduction ratio of 80-120, instantaneous overload capacity of 200%

There are many applications of various high-precision non-standard devices.

Selection trap

Avoid axial force exceeding 5% of rated load (causing deformation of the planetary carrier)

High dynamic scenes require verification of angular acceleration (>500rad/s ² requires special design)

3、 Worm gear reducer: self-locking safety guard
Core advantages

Self locking condition: Reverse efficiency<35% when speed ratio ≥ 40

Noise reduction performance: Sliding friction noise ≤ 65dB (A), better than gear transmission by 10dB

Used for lifting and dragging devices with high loads